Compact stand up paddle and kayak dual-action, high-pressure pump 0-20 PSI
Inflate your stand up paddle board and canoe/kayaks to 20 PSI. This dual-action hand pump enables you to easily inflate to more than 15 PSI
Directions for use
1/Stand on level and solid ground 2/Check that the hose is attached on the INFLATE side 3/Connect the hose to the inflatable 4/Turn the orange ring to position 1 5/Inflate the craft until it becomes difficult (approx. 8 PSI) 6/Turn the orange ring to position 2 7/Finish inflating to the recommended pressure. Pump supplied with 2 seals on the inflation nozzle to fit most valves on the market. (orange: ITIWIT/black: other)
Storage instructions
Use the fastening clip to attach the hose and pump together. Do not stand on the pump or the hose. Clean off any sand and/or salt, as this may damage the seals.
Technical dimensions
Height: 47 cm Width: 30 cm Hose length: 90 cm 60 mm diameter piston for easy high-pressure inflation. Easy to inflate for everyone. Pump weight: 1.3 kg
Sold with a set of adapters
In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with: A "Mini Boston" adapter to inflate the kayak seats a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents. An adapter and end piece to inflate certain kitesurfing wings.
This compact, high-pressure and dual-action pump has two function modes: one to increase volume, and one to reach the right pressure of the craft. The deflation action drains air from the craft.
Compact design
Measuring only 47 cm when stored, you’ll save space in storage or on the go
Ergonomic grip
A pump designed to make sure that you don’t waste all your energy on inflation.
Flexibility
Its flexible hose makes the pump more compact and easier to store
Parameter measurement
Built-in 3-20 psi pressure gauge. Accurate from 3 PSI.
Ease of use
2 MODES mode 1: inflation (0-8 psi) mode 2: pressurisation (8-20 psi)
Versatility
Can be used to inflate and deflate your inflatable
Inflate your stand up paddle board and canoe/kayaks to 20 PSI. This dual-action hand pump enables you to easily inflate to more than 15 PSI
Original: $74.59
-70%$74.59
$22.38Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Inflate your stand up paddle board and canoe/kayaks to 20 PSI. This dual-action hand pump enables you to easily inflate to more than 15 PSI
Directions for use
1/Stand on level and solid ground 2/Check that the hose is attached on the INFLATE side 3/Connect the hose to the inflatable 4/Turn the orange ring to position 1 5/Inflate the craft until it becomes difficult (approx. 8 PSI) 6/Turn the orange ring to position 2 7/Finish inflating to the recommended pressure. Pump supplied with 2 seals on the inflation nozzle to fit most valves on the market. (orange: ITIWIT/black: other)
Storage instructions
Use the fastening clip to attach the hose and pump together. Do not stand on the pump or the hose. Clean off any sand and/or salt, as this may damage the seals.
Technical dimensions
Height: 47 cm Width: 30 cm Hose length: 90 cm 60 mm diameter piston for easy high-pressure inflation. Easy to inflate for everyone. Pump weight: 1.3 kg
Sold with a set of adapters
In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with: A "Mini Boston" adapter to inflate the kayak seats a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents. An adapter and end piece to inflate certain kitesurfing wings.
This compact, high-pressure and dual-action pump has two function modes: one to increase volume, and one to reach the right pressure of the craft. The deflation action drains air from the craft.
Compact design
Measuring only 47 cm when stored, you’ll save space in storage or on the go
Ergonomic grip
A pump designed to make sure that you don’t waste all your energy on inflation.
Flexibility
Its flexible hose makes the pump more compact and easier to store
Parameter measurement
Built-in 3-20 psi pressure gauge. Accurate from 3 PSI.
Ease of use
2 MODES mode 1: inflation (0-8 psi) mode 2: pressurisation (8-20 psi)
Versatility
Can be used to inflate and deflate your inflatable
Inflate your stand up paddle board and canoe/kayaks to 20 PSI. This dual-action hand pump enables you to easily inflate to more than 15 PSI
